Commuter Exposures to VOCs in Boston,Massachusetts

This study examines the commuter’s exposure to six gasoline-related volatile organic compounds (VOCs): benzene, toluene, ethylbenzene, m-/p-xylene, o-xylene, and formaldehyde. The VOC concentrations to which commuters were exposed in four different commuting modes (driving, subway, walking, and biking) in Boston, Massachusetts, are compared. The VOC concentrations in participants’ homes and offices were also measured. Factors that could influence in-vehicle VOC concentrations, such as different traffic patterns, car model and vehicle ventilation conditions, were also evaluated. Driving a private car was associated with higher VOC concentrations and commuting on urban roadways resulted in the highest VOC concentrations. The use of car heaters resulted in higher in-vehicle VOC concentrations. The longer the subway commuters stayed underground, the higher their VOC exposures. The home-to-work car or subway commute represented about 10 to 20 percent of an individual’s total VOC exposure for these compounds.     

Increased deposition of polychlorinated biphenyls (PCBs) under an AC high-voltage power line

There is considerable public concern regarding the potential risks to health of electromagnetic fields in general and high-voltage power lines in particular. As epidemiological findings are not supported by a clearly defined mechanism of direct magnetic field interactions with the human body, potential indirect effects are of interest. It has been suggested that an increased exposure to chemical pollutants could occur near high-voltage power lines due to formation and deposition of charged aerosols. The current study reports empirical evidence that seems to support this hypothesis. The deposition of 18 congeners of polychlorinated biphenyls (PCBs) was studied by collecting samples of pine needles under a 400 kV AC power line and at reference sites in the vicinity. Compared to the reference sites, the average deposition of PCB congeners under the power line was almost double. This difference between the two groups of samples was statistically significant. While it is premature to draw any conclusions regarding the human exposure near high-voltage power lines, the issue deserves attention and further investigations.     

An examination of the effects of land use changes on nature conservation rulings in Çeşme peninsula, Turkey

Because of their intense vegetation and the fact that they include areas of coastline, deltas situated in the vicinity of big cities are areas of great attraction for people who wish to get away from in a crowded city. However, coasts, with their fertile soil and unique flora and fauna, need to be protected. In order for the use of such areas to be planned in a sustainable way by local authorities, there is a need for detailed data about these regions. In this study, the changes in land use of the area between Topburnu and Uçburun Musa Bey Harbour on the Çe?me peninsula, which is to the immediate west of Turkey’s third largest city ?zmir, from 1976 up to the present day, were investigated. In the study, using aerial photographs taken in 1976, 1995 and 2000 and an IKONOS satellite image from the year 2007, the natural and cultural characteristics of the region and changes in the coastline were determined spatially. Using aerial photographs from 1976, 1995 and 2000 and an IKONOS satellite image from the year 2007, together with “1/25,000 scale Conservation-Oriented Development Plans” prepared in 1979, 1990 and 2000 by the committee for the Preservation of Natural and Cultural Entities attached to the Ministry of Culture and Tourism of the Turkish Republic, the natural and cultural characteristics of the region and the land use changes and their connection with conservation rulings were determined spatially. In this study, spatial changes in land use over the years were compared with changing conservation rulings over the years and the emerging results have brought a new perspective to the subject in contrast to other similar studies.     

Analysis of coupled model uncertainties in source-to-dose modeling of human exposures to ambient air pollution: A PM2.5 case study

Quantitative assessment of human exposures and health effects due to air pollution involve detailed characterization of impacts of air quality on exposure and dose. A key challenge is to integrate these three components on a consistent spatial and temporal basis taking into account linkages and feedbacks. The current state-of-practice for such assessments is to exercise emission, meteorology, air quality, exposure, and dose models separately, and to link them together by using the output of one model as input to the subsequent downstream model. Quantification of variability and uncertainty has been an important topic in the exposure assessment community for a number of years. Variability refers to differences in the value of a quantity (e.g., exposure) over time, space, or among individuals. Uncertainty refers to lack of knowledge regarding the true value of a quantity. An emerging challenge is how to quantify variability and uncertainty in integrated assessments over the source-to-dose continuum by considering contributions from individual as well as linked components. For a case study of fine particulate matter (PM_2.5) in North Carolina during July 2002, we characterize variability and uncertainty associated with each of the individual concentration, exposure and dose models that are linked, and use a conceptual framework to quantify and evaluate the implications of coupled model uncertainties. We find that the resulting overall uncertainties due to combined effects of both variability and uncertainty are smaller (usually by a factor of 3–4) than the crudely multiplied model-specific overall uncertainty ratios. Future research will need to examine the impact of potential dependencies among the model components by conducting a truly coupled modeling analysis.     

On the Determination of Odor Thresholds in Air Pollution Control—An Experimental Field Study on Flue Gases from Sulfate Cellulose Plants

From the hygienic point of view, not only the health hazards caused by air pollutants but also the odor from emitted flue gases should be reduced to a minimum. An effective control of the risk of odor at ground level presupposes knowledge of the source concentration of the odoriferous gas as well as its odor threshold. This threshold has to be estimated empirically, as the flue gases often contain a complex mixture of different odoriferous substances, the odor thresholds of which are in most cases unknown. For this purpose a method has been developed for estimating the odor thresholds of flue gases emitted, from different industrial processes. The method, afield method, is based on an exposure procedure, a number of subjects compare different concentrations of the flue gas with samples of fresh air and decide at what concentration the flue gas is no longer noticeable. The gas samples used are neither compressed, nor absorbed or heated before the exposure test. The method has been used in two studies on gases from Swedish sulfate cellulose plants. In order to estimate the effect on the odor threshold of different deodorizing measures, gas samples were taken not only from the stack but also from different phases in the production process. The results and a brief discussion on the practical applications of the method are given.     

An improved user-based beach climate index

In many coastal resort areas of the world, it is likely that optimal climatic conditions for beach use might occur outside the peak of the tourist season. Investigation of this issue together with associated publicity might help to spread the tourism load and hence reduce undesirable social and environmental effects of extreme seasonality in tourist demand. For this to take place, better knowledge of beach user preferences in terms of climate and bathing water temperature is required. Questionnaire surveys were carried out in Wales, Malta and Turkey to establish the preferences of north European beach users for thermal sensation and bathing water temperature, plus priority levels for other climatic attributes. A user-based beach climate index based on these preferences and priorities was formulated. Linkage was made between the user-generated ratings for various climatic conditions and published climate data to evaluate most major Euro-Mediterranean/Black Sea and a range of other beach tourism areas on a month-by-month basis. Results showed excessively hot thermal sensation in many southern and eastern Mediterranean coastal destinations during July and August, the present peak of the beach tourism season. Highest preference was given to water temperatures rather lower than those found in these areas during late summer. Many long haul coastal destinations popular with north European visitors had similar unpleasant thermal sensations over several months. Uncertainties and deficiencies still exist with the system, but from the point of view of north European beach users the final scores generated in this study may be regarded as good approximations of the quality of resort area climates for sedentary beach use.     

Macro- and microelement contents of some legume seeds

Macro- and microelement contents of legume seeds were determined by ICP-AES. The potassium K contents of seeds ranged between 7,426 mg/kg (Lupinus albus L.) and 16,558 mg/kg (Phaseolus vulgaris L. ssp. sphaericus Mart). In addition, while P contents of seeds changed from 2,719 mg/kg (L. albus L.) to 5,792 mg/kg (Vigna sinensis (L.) Savi), Ca contents ranged at the levels between 1,309 mg/kg (Cicer arietinum L.) and 2,781 mg/kg (L. albus L.). The microelement contents of samples were found to be different depending on several species. The iron levels of samples were determined at the levels between 90.51 mg/kg (Phaseolus mungo L.) and 152.80 mg/kg (P. vulgaris L. ssp. sphaericus Mart). In addition, Zn contents of seeds were found between 31.32 mg/kg (C. arietinum L.) and 44.75 mg/kg (V. sinensis (L.) Savi).     

Transesterification of hazelnut oil by ultrasonic irradiation

Ultrasonic irradiation is considered an effective way to increase mass transfer between immiscible liquid–liquid phases in a heterogeneous system leading to faster transesterification and higher yield and saving excess methanol and catalyst. In this study, the transesteri?cation of hazelnut oil with methanol and ethanol was performed in the presence of potassium hydroxide or sodium methoxide as a catalyst using two types of ultrasonic irradiation with a probe (20 kHz, 200 W) and a bath (35 kHz, 400 W); a conventional production method was also used. The reaction time, alcohol:oil molar ratio, catalyst type (KOH or NaOCH₃), and catalyst amount (wt.% of oil) were studied as experimental parameters. The highest methyl ester conversion was obtained as 98.12% by using ultrasonic probe at a 5:1 methanol:oil molar ratio with KOH 1 wt.% of oil as catalyst in 20-min reaction time at autogenous temperature. The application of ultrasonic irradiation by using a probe decreased the level of energy consumption, showing that this method may be a promising alternative compared with the conventional production method.